Low head socket cap screws are designed to be used where clearance is an issue or the mating parts are too thin for a standard socket head cap screws.
Due to the head design these parts should not be used in critical applications where high tensile strength is required.
Socket Cap screws have an in-hex drive and are fastened using a hexagonal wrench also known as an Allen key.
Lower head profile with head height of 1/4"
Use Allen key size = 1/4"
Thread = 13 TPI
Hardness HRC ( Hardness Rockwell C Scale ) = 39-44
Tensile Strength ( psi ) = 145,000 min
