M6 *FITTING* HEX NUT CL 8 GALV

Thread Pitch = 1.0mm
Hexagon Across the Flats ( AF ) = 10mm
High Tensile Class 8
DIN Standard 934
Galvanised Finish

The nut thread is tapped after galvanizing so the threads are not coated.
The corrosion resistance however is not influenced disadvantageously as the thread will be protected by the zinc layer of the mating part.

GST Incl
Excl
M6 *FITTING* HEX NUT CL 8 GALV
NHTFIT06G
Each
$0.1984